APC UCCS Temperature Control - Manual (Page 15)

JANUARY 2008 UCCS STANDARDS 15950-15
4. Duct-mounted
a. (UCCS to add preferred manufacturer here)
10. Transmitters - Solid State
a. Water, Compressed Air, Steam pressure transmitters
1. See 2.11 B [3.]
b. Water differential pressure transmitters
1. Rosemount series 3051 or pre-approved equal
c. Water differential pressure transmitters
1. Dwyer Capsuhelic or pre-approved equal
2. with Hanson fittings
d. Air differential static pressure transmitters
1. Air Monitor, Dwyer, or pre-approved equal
2. For critical applications
a. See 2.11 B 7 [Note to Consultant]
e. Air differential pressure transmitters
1. Dwyer Magnehelic Series 605 or pre-approved equal
11. Auxiliary Devices - Electric
a. Flow-proving or equipment-operating-status switches
1. Paddle-type switches
a. Penn, Mcdonald Miller, Flotect V-6 or pre-approved equal.
2. Damper end switches
a. Kele & associates TS-470
3. Current Sensors:
a. Split Core ( clamp on) Neilsen-Kuljian or Kele SCS series or SD100 with
led or pre-approved equal
b. Pressure switch