Learn easy software map, Software map; learn, Software organization – Watlow Series 935B User Manual
Page 11: Yes] [~yes, Navigation example, Ot2] [disp] [alty, Display, Operations, Configuration
,
,
,
Watlow Series 935B User’s Manual 11
Software Organization
• The Series 935B has three primary menus in addition to a normal display.
• The software reverts to the normal display after 60 ± 5 sec. with no key action.
Table 3 - Software Organization
Display
Actual Temperature, Set Point, or Time Remaining
Start / Stop:
•Autotune
Set:
•Alarm Ranges
•Countdown Timer
•Idle after Timer
Select
Set Point Type:
•Local / Remote
Go to:
PID Menu
Configuration Menu
Set:
•Heat PID Functions
•Dead Band
•Cool PID Functions
•Calibration Offset
Set:
•Inputs / Functions
•Output Types
•Display Default
•Alarms / Functions
•Timer Functions
•Failure Mode
•Lockout Functions
[~yes]
[~yes]
• To access the Operations Menu, press the
.
and
,
keys simultaneously for three seconds.
• At the
[`pid]
or
[Cnfg]
prompt, press and hold the
ß
key, and the
.
or
,
key to select
[`yes]
. Release the keys to move to the new menu.
• Move through each menu with the
.
or
,
key.
• Make changes by pressing and holding the
ß
key, and
then the
.
or
,
key to select a new choice or
value. Release the keys to complete the change.
• To exit any menu: Press and hold the
.
and
,
keys for three seconds,
or
the display will revert to normal display
after 60± 5 seconds.
Navigation Example
[Prnc] [Prno [dEnc [dEno
[`Ot2]
[disp]
[Alty]
,
Learn Easy Software Map
.
.
.
,
,
,
,
Я