Watlow Series 935B - Manual (Page 2)

Safety Information in this Manual
Note, caution and warning symbols appear throughout this book to draw your attention to
important operational and safety information.
A “NOTE” marks a short message to alert you to an important detail.
A “CAUTION” safety alert appears with information that is important for protecting your
equipment and performance.
A “WARNING” safety alert appears with information that is important for protecting you,
others and equipment from damage. Pay very close attention to all warnings that apply to
your application.
The ç symbol (an exclamation point in a triangle) precedes a general CAUTION or
WARNING statement.
The Ó symbol (a lightning bolt in a lightning bolt in a triangle) precedes an electric
shock hazard CAUTION or WARNING safety statement.
Technical Assistance
If you encounter a problem with your Watlow controller, review all configuration informa-
tion to verify that your selections are consistent with your application: inputs; outputs;
alarms; limits; etc. If the problem persists after checking the above, you can get technical
assistance by calling your local Watlow representative (see back cover of this manual), or
in the U.S., dial +1 (507) 494-5656. For technical support, ask for an Applications
Engineer.
Please have the following information available when you call:
• Complete model number • All configuration information
• User’s Manual • Diagnostic menu readings
Warranty and return information is on the inside back cover of this manual.
Your Comments
Your comments or suggestions on this manual are welcome. Please send them to the
Technical Literature Team, Watlow, 1241 Bundy Boulevard, P.O. Box 5580, Winona,
Minnesota, 55987-5580 U.S.; Telephone: +1 (507) 454-5300; fax: +1 (507) 452-4507.
Copyright July 2000 by Watlow, Inc., with all rights reserved. (1950)
ç
Safety Alert
CAUTION or
WARNING
∫
Electrical Shock
Hazard
CAUTION or
WARNING