Watlow Series 935B - Manual (Page 24)

(Closed switch = Starts Timer)
Figure 5 - Remote Timer Start Wiring
See p. 45 for more wiring information.
24 Watlow Series 935B User’s Manual
To Set Up Remote Timer Start…
1. Wire the control per the example below and the information on p. 44-45.
2. Make [``In] and [`C_F] choices, then
3. Select [`tmr] at the [`rts] prompt.
4. Close switch to remotely start the timer.
Ó
WARNING: All wiring and fusing must conform to local and
national electric codes. Contact local authorities for further
information. Failure to comply with electric codes could result
in injury or death, or damage to property.
Configuration Menu
[``In]
✓
Input Type
[`C-F]
✓
Celsius/Fahrenheit
[``rL]
Input Range Low
[``rh]
Input Range High
[`Ot1]
✓
Output 1 Function
[`Ot2]
Output 2 Function
[`rts]
✓
Remote Timer Start
[dISP]
Display Default
•
•
•
[FAIL]
Failure Mode
[SLOC]
Set Point Lockout
[`TAG]
Lockout Tag
Operations
Menu
[`Aut]
Auto-tune
[`L-r]
Local / Remote
[`Pid]
PID
[CnFG]
Configuration
Using Remote Timer Start Input
–
1 +
2
C
O
M
3
R
T
S
4
O
T
1
5
O
T
2
6 7 8
Load 2
Load 1
Note:
Note: Customer -supplied N.O. momentary switch.