Boltek EFM-100 v.2 - Manual (Page 17)

C H A P T E R 2 - I N S T A L L A T I O N
11
EFA-10 Fiber Optic Adapter
The EFA-10 Fiber Optic Adapter converts the optical data from the field mill to an
electrical signal compatible with your personal computer. Data is transmitted optically
from the field mill at 9600 baud, 8 data bits, 1 stop bit, no parity.
Figure 10: EFA-10 Fiber Optic Adapter
The EFA-10 converts this optical data stream to an electrical signal compatible with your
computer’s RS232 COM port.
EFA-20 Fiber Optic Adapter
The EFA-20 Fiber Optic Adapter converts the optical data from the field mill to an
electrical signal compatible with your personal computer's USB port.
Figure 11: EFA-20 Fiber Optic Adapter