Boltek EFM-100 v.2 - Manual (Page 41)

C H A P T E R 5 - M A I N T E N A N C E
35
Maintenance
Your EFM-100 should run for years with very little maintenance. An occasional cleaning may be all
that is necessary. In most installations even that will not be necessary as rain will wash away any
accumulated dirt.
Periodically inspect your field mill to ensure the Teflon insulators are free from dirt or contamination.
Watch for spider webs or other debris which could short an electrode to ground (the case.)
Figure 34: Field Mill Cleaning
Chapter 5