Boltek EFM-100 v.2 - Manual (Page 29)

C H A P T E R 3 – C O N F I G U R I N G T H E S O F T W A R E
23
Field Mill Selector
Select the field mill for which you would like to enable or disable Very High Field Alarm.
Setpoint
Very High Field Alarm Setpoint is the magnitude of electric field required to trigger a Very High
Field Alarm. For example, with a setpoint of 1 kV/m the alarm will activate if the field goes above 1
kV/m or below -1 kV/m.
Delay
The Very High Field Alarm Delay is the length of time the field magnitude must remain above the
setpoint before the alarm is activated. If the electric field magnitude drops below the setpoint before
the delay expires the delay timer will be reset. For example, with a delay of 30 seconds and setpoint
of 1 kV/m the electric field must remain above 1 kV/m or below -1 kV/m for 30 seconds before the
alarm activates.
Duration
Very High Field Alarm Duration is the length of time the Very High Field Alarm will remain active
once the field drops below the alarm setpoint.
WAV File Checkbox
Check the checkbox to enable the playing of WAV file sound when the Very High Field Alarm
activates. Clear the checkbox to disable the playing of the WAV sound.
WAV Filename
The WAV Filename is the file which will play out the computer speakers when the Very High Field
Alarm is activated.
Click on the Browse icon
to select the WAV file from a list.
Click on the Play icon to listen to the selected WAV file
WAV Repeat Interval
Enter the number of seconds between repeats of the WAV sound.