Brocade Network Advisor SMI Agent Developers Guide v12.3.0 - Manual (Page 128)

112 Brocade Network Advisor SMI Agent Developer’s Guide
53-1003159-01
Alert indications
4
Core8 Change in operational status for port.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=SNIA and
MessageID=Core8 AlertingManagedElement COP of
Brocade_SwitchFCPort
AlertingElementFormat COP
AlertType Device Alert
OtherAlertType Port Alert
AlertSubType FC Port operational
status modified
PerceivedSeverity 5 (Major)
ProbableCause 123
SystemCreationClassName Brocade_Switch
SystemName Switch WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity SNIA
Message <Device Unique
Identifier> status
changed to <Port
Status>
MessageArguments SwitchFCPort WWN,
Switch
Core 10 User login failure
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=SNIA and MessageID=Core
10
How to trigger: Telnet to the switch and
provide an incorrect password.
NOTE: BRCD2 is now replaced with
Core10. Core 10 indication is
supported only for FOS switches.
This indication is not delivered if
SNMP registration fails.
Core 10 indications are delivered
when trackChangeset and SNMP
forward options are enabled in
switch.
AlertingManagedElement COP of Brocade_Switch
AlertingElementFormat COP
AlertType Security
OtherAlertType N/A
AlertSubType User Login Failure
PerceivedSeverity 3 (Warning)
ProbableCause 123
SystemCreationClassName Brocade_Switch
SystemName Switch WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity SNIA
Message <Device Type> <Device
Unique Identifier> user
<User> had login failure
MessageArguments Device Type = Switch;
Unique Identifier = WWN;
User = UserName
TABLE 14 Supported alert indications (Continued)
Message ID Trigger Property Value