Brocade Network Advisor SMI Agent Developers Guide v12.3.0 - Manual (Page 136)

120 Brocade Network Advisor SMI Agent Developer’s Guide
53-1003159-01
Alert indications
4
BRCD25 Download of firmware was completed.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=BROCADE and
MessageID=BRCD25
NOTE: BRCD25 indication is not
applicable for EOS switches.
AlertingManagedElement COP of Brocade_Switch
AlertingElementFormat COP
AlertType Other
OtherAlertType Switch Alert
AlertSubType Firmware download
completed
PerceivedSeverity 5 (Major)
ProbableCause 123
SystemCreationClassName Brocade_Switch
SystemName Switch WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity BROCADE
Message Firmware download
completed for switch
<WWN>
MessageArguments Switch WWN
BRCD26 HA Failover has completed.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=BROCADE and
MessageID=BRCD26
How to trigger: After establishing the
connection to switch from Brocade SMI
Agent, perform an HA failover on the
switch from the CLI.
NOTE: BRCD26 indication is not
supported for EOS switches.
AlertingManagedElement COP of Brocade_Switch
AlertingElementFormat COP
AlertType Other
OtherAlertType HA Alert
AlertSubType Failover completed
PerceivedSeverity 2 (Informational)
ProbableCause 123
SystemCreationClassName Brocade_Switch
SystemName Switch WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity BROCADE
Message HA failover has
completed for Switch
<WWN>
MessageArguments SwitchWWN
TABLE 14 Supported alert indications (Continued)
Message ID Trigger Property Value