Brocade Network Advisor SMI Agent Developers Guide v12.3.0 - Manual (Page 87)

Brocade Network Advisor SMI Agent Developer’s Guide 71
53-1003159-01
CEE switch support
3
• An existing Brocade_CEEACLPolicy instance may be modified using the
Brocade_CEEACLService.ModifyRole() extrinsic method. The input parameters Role and
Privileges are required. Refer to MOF content for details on the parameters. The call replaces
the existing Brocade_CEEACLRules instance for the Brocade_CEEACLPolicy specified in the
input parameter Role with the instance of Brocade_CEEACLRules specified in the input
parameter Privileges. Assigning to targets is not supported during modification. This can be
done separately through the AssignRoles operation.
• An existing Brocade_CEEACLPolicy instance may be deleted using the
Brocade_CEEACLService.DeleteRole() extrinsic method. This method deletes the instance and
its associated rules.
• A Brocade_CEEACLPolicy may be applied to an Ethernet port, LAG, or VLAN using the
Brocade_CEEACLService.AssignRoles() extrinsic method. Only one policy can be applied at a
time on a Managed Element.
FIGURE 31 CEE ACL class diagram