Brocade Network Advisor SMI Agent Developers Guide v12.3.0 - Manual (Page 68)

52 Brocade Network Advisor SMI Agent Developer’s Guide
53-1003159-01
Launch In Context profile
3
NOTE
The HBA is represented by the PortController class and the serial number is the key.
Launch In Context profile
Brocade Network Advisor supports a number of services for network management, such as
Configure Names, Historical Performance Report, Fabric Ports Report, and so on. These services
are published through the Launch In Context (LIC) profile.
LIC names
Table 11 shows the list of LIC names and their descriptions.
TABLE 11 Description of LIC names
LIC name Description
About Displays the product and version information.
CEE_CEE_Configuration Configures CEE parameters for QoS (ETS, PFC),
LAG groups, LLDP, DCBX, ACL, STP, 802.1X
authentication.
CEE_QoS_Configuration Configures QoS parameters on CEE switches.
Discovery Allows discovering the fabrics and hosts.
Discovery_Host_Adapters Discovers groups of Brocade host adapters.
Fabric_TopNTalkers_Report Displays the historical performance report for the
top talkers that are using the most bandwidth on
the selected fabric.
Fabric_Switch_Ports_Report Displays the port details report for all the
discovered ports in the given fabric. The port detail
includes switch information, connected device
information, and so on.
Fabric_Switch_Configuration_Backup Backs up the switch configuration from one or
more switches.
Fabric_Switch_Configuration_Restore Restores the switch configuration for one or more
switches.
Fabric_Switch_Software_Update Downloads firmware to one or more switches.
Fabric_Switch_SupportSave Captures supportSave information from one or
more selected switches and hosts. Also, ability to
schedule later to capture the supportSave
information from one or more switches.
Fabric_Switch_Threshold_Policies Configures threshold policies on E_Ports and
F_Ports or FL_Ports for the Tx and Rx percentage
utilization measures. Sends an appropriate alert to
notify when the threshold is exceeded.
Fabric_Device_Connectivity_Diagnostics Identifies the problems preventing communication
between the two selected device ports from the
same fabric or from two different fabrics.