Brocade Network Advisor SMI Agent Developers Guide v12.3.0 - Manual (Page 174)

158 Brocade Network Advisor SMI Agent Developer’s Guide
53-1003159-01
Brocade Network Advisor SMI Agent Error Codes
A
60004 Switch in other fabric error
60005 Fabric does not exist error
60006 Switch does not exist error
60007 Duplicate fabric name error
60008 Seed switch does not exist error
60009 General authentication error
60010 Invalid SNMP credentials error
60011 Switch IP does not match with WWN
60012 Invalid IP address
60013 Session limit reached error
60014 Discovery fabric is unstable
60015 Error due to SNMP survey failure
60016 Unsupported vendor
60017 Invalid credentials error
60018 Error due to switch initialization
60019 Error due to switch link disabled
60020 Switch is not available, trap registration error
60021 Error due to switch product deletion
60022 Error due to SSL switch failure
60023 Switch timeout error
60024 Error due to too many switch sessions
60025 Switch trap registration failure error
60026 Switch trap registration lost error
60027 Connection lost error
60028 Link never connected error
60029 Connection timeout error
60030 Request failed
60031 Switch invalid network address
60032 Switch invalid product type
60033 Switch protocol error
60034 Switch unmanageable due to unknown firmware
60035 HTTP error
60036 The limit of the fabric count is reached
60037 Unsupported switch mode
60038 Unsupported firmware version
60039 FCOE not supported
TABLE 16 Error codes (Continued)
Error code Description