Brocade Network Advisor SMI Agent Developers Guide v12.3.0 - Manual (Page 143)

Brocade Network Advisor SMI Agent Developer’s Guide 127
53-1003159-01
Alert indications
4
BRCD48 A data value is greater than the high
threshold boundary.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=BROCADE and
MessageID=BRCD48
NOTE: BRCD48 indication is supported
for the Environment, Port, and
E_Port Fabric Watch classes.
Ignore the Fabric Watch
indications for non-supported
Fabric Watch classes (GBIC or
SFP, Fabric, F and FL Port, SAM,
Security), as they are not
supported.
BRCD48 is supported in switches
running Fabric OS v6.1.0 and
later.
AlertingManagedElement COP of Brocade_Switch
AlertingElementFormat COP
AlertType Other Alert
OtherAlertType Fabric Watch
AlertSubType Threshold Above
PerceivedSeverity 2 (Informational)
ProbableCause 123
SystemCreationClassName Brocade_Switch
SystemName Switch WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity BROCADE
Message Fabric Watch Threshold
Above
MessageArguments N/A
BRCD49 A data value is less than the low
threshold boundary.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=BROCADE and
MessageID=BRCD49
NOTE: BRCD49 indication is supported
for the Environment, Port, and
E_Port Fabric Watch classes.
Ignore the Fabric Watch
indications for non-supported
Fabric Watch classes (GBIC or
SFP, Fabric, F and FL Port, SAM,
Security), as they are not
supported.
BRCD49 is supported in switches
running Fabric OS v6.1.0 and
later.
AlertingManagedElement COP of Brocade_Switch
AlertingElementFormat COP
AlertType Other Alert
OtherAlertType Fabric Watch
AlertSubType Threshold Below
PerceivedSeverity 2 (Informational)
ProbableCause 123
SystemCreationClassName Brocade_Switch
SystemName Switch WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity BROCADE
Message Fabric Watch Threshold
Below
MessageArguments N/A
TABLE 14 Supported alert indications (Continued)
Message ID Trigger Property Value