Brocade Network Advisor SMI Agent Developers Guide v12.3.0 - Manual (Page 135)

Brocade Network Advisor SMI Agent Developer’s Guide 119
53-1003159-01
Alert indications
4
BRCD21 Database changes for a fabric service
were completed.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=BROCADE and
MessageID=BRCD21
How to trigger: Enable or disable switch
connected to HBA. AlertingManagedElement COP of Brocade_Node
AlertingElementFormat COP
AlertType Other
OtherAlertType Device Alert
AlertSubType Database Change
Completed
PerceivedSeverity 2 (Informational)
ProbableCause 123
SystemCreationClassName Brocade_Fabric
SystemName Fabric WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity BROCADE
Message Device database change
completed for fabric
named <WWN>
MessageArguments Fabric WWN
BRCD24 Download of firmware to the element was
initiated.
Query: SELECT * FROM
CIM_AlertIndication WHERE
OwningEntity=BROCADE and
MessageID=BRCD24
How to trigger: Initiate firmware download
from CLI.
NOTE: BRCD24 indication is not
applicable for EOS switches.
AlertingManagedElement COP of Brocade_Switch
AlertingElementFormat COP
AlertType Other
OtherAlertType Switch Alert
AlertSubType Firmware download
started
PerceivedSeverity 2 (Informational)
ProbableCause 123
SystemCreationClassName Brocade_Switch
SystemName Switch WWN
ProviderName Brocade_AlertIndication
Provider
OwningEntity BROCADE
Message Firmware download
started for switch
<WWN>
MessageArguments Switch WWN
TABLE 14 Supported alert indications (Continued)
Message ID Trigger Property Value