Brocade Network Advisor SMI Agent Developers Guide v12.3.0 - Manual (Page 70)

54 Brocade Network Advisor SMI Agent Developer’s Guide
53-1003159-01
Launch In Context profile
3
Registration and data model
Figure 26 shows the class diagram of the LIC profile.
The Brocade_LICServiceAccessPoint of Configuration Tool and Brocade Network Advisor client are
associated to Brocade_ManagementServer through
Brocade_LICMgmtServerHostedServiceAccessPoint. Other than the Configuration Tool and
Brocade Network Advisor client, the service access points are associated to Brocade_SAN through
Brocade_LICSANHostedServiceAccessPoint.
Each Brocade Network Advisor's service launch point is represented by an instance of
Brocade_LICServiceAccessPoint. The access point is hosted on the Brocade_SAN.
The value of Brocade_LICServiceAccessPoint.AccessInfo property is of the following format:
http://<IP Address: port number>/webstart/<JNLP file name>?module=<Network Advisor module
name>&<SSO parameters if any from Network Advisor client>&${parameterName}
Where ${parameterName} specifies the LIC parameters supported for the specific Network Advisor
dialog box URL.
The Brocade_LICServiceAccessPoint.ParameterName is an array holding the LIC parameters
specified in the URL of AccessInfo property value. The Brocade_LICServiceAccessPoint.Parameter
Description is holding the description of the parameters in the ParameterName array.
In the AcessInfo URL, replace the ${parameterName} with name and value of the ParameterName
array in the format mentioned in the description.
Fabric_ProductStatus_Log Displays events which indicate a change in switch
status for all discovered switches.
Fabric_Router_Configuration Configures FC routing to connect devices in
different fabrics without merging the fabrics.
Enables you to connect edge fabrics to a backbone
fabric.
Fabric_Security_Log Displays all security events for the discovered
switches.
Fabric_Syslog Displays syslog messages from switches.
Fabric_Syslog_Forwarding Configures forwarding syslog events of this server
to a destination on a different host.
FCoE_Configuration Creates, edits, and deletes the FCoE login groups
and view the connected devices for FCoE ports.
Names Configures a user-defined name to the fabric,
switch, port, or device.
Server_Info Displays all parameters associated with the server.
User_Management Configures the users and their roles in the
management application.
User_Preferences Configures the options available in the
management application.
VLAN_Configuration Configures VLAN on switches.
TABLE 11 Description of LIC names (Continued)
LIC name Description