LT Security LTD6299 - Manual (Page 14)

- 13 -
3. Installations
The installations described below should be made by qualified service personnel or system
installers.
3.1 Basic Connections
Please refer to the following diagram for the connections.
Please make sure to set the NTSC/PAL Selector Switch on the back panel according to
the local TV system for the digital video/audio recorder to work correctly.
„ Cameras
Connect the camera video input connectors to the video outputs from system cameras or
other composite video sources via coaxial cables.
„ Main monitor
Connect the main monitor output connector (BNC or S-video) to a surveillance TV
monitor. The TV monitor displays selected live or recorded cameras in any available
split window format.
„ Hard disk drive(s)
Make sure to install at least one hard disk drive inside the hard disk tray.
Note: Each of the HDDs must be formatted before it can be used to record
video/audio. Please refer to Section 6.6.1 HDD Format/Clear to format the
HDDs.