LT Security LTD6299 - Manual (Page 20)

- 19 -
(3) Press code in text editing mode to change text case. (If this entry can accept number
only, pressing code will have no effects.) Indicators on the screen show the current
setting:
123 = Number only
abc = No capital letters
ABC = All capital letters
CODE = Internal code for the selected language, such as Chinese, Japanese, etc.
(4) Press a number key (1-9, 0) repeatedly until the character you want appears. (1 for 1 or
space, 2 for 2, a/A, b/B, or c/C, the others as shown on the keypad) If internal CODE is
selected, a CODE box will be shown (after the first code is entered) for each new code to
be entered. Please check the internal code table for the selected language. For 2-byte
code, e.g. Chinese or Japanese, the code accepted is from 0000 - FFFF.
(5) Press mark to bring up a list of punctuation marks and special characters. The
highlighted character in the list shows the selected one. Press ▲▼◄► to change the
selection.
(6) If you make a mistake, press BS to remove the character to the left of the cursor, or press
DEL to delete the character at the current cursor position.
(7) In text editing mode, internal code box, and mark list, press ENTER to exit and save
changes, press ESC to exit without making changes.
4.2 Login And Logout
There are three password levels in the system, including Administrator (highest),
Supervisor, and Operator (lowest). If the user does not login the system, he/she will be
treated as “Guest” and can only view live video display.
The system allows up to 18 user accounts. The administrator can set up the login name and
password for each user. (Please refer to
Section 6.7 for Password Setup.)
The Operator can operate live video display, the Supervisor live video display, image
playback and archive, and the Administrator everything.
To login/logout the system, press MENU in
split-window display to call up Menu display, and
then press ENTER when the highlighted option is
Login/Logout to enter Login/Logout display as
shown.
In Login/Logout display, follow the Text Input
method described in
Section 4.1 to enter the Login name and Password, press ▲▼ to
highlight and select Login option, and then press ENTER to login the system. If the user
wants to logout the system, just press ▲▼ to highlight and select Logout option, and then
press ENTER. Press ESC to exit without making changes.