LT Security LTD6299 User Manual
Page 64
- 63 -
correctly. Please refer to
for the detailed configurations.
2. DirectX® End-User Runtime 9.0 or above has been installed in your PC successfully. If
not, please logon to
3. The domain name or IP address of the digital video/audio recorder has been set as
trusted
web site
in your PC, and the
(https:) server verification
for trusted web site is
unchecked. If not, please go to Tools->Options->Security in your I.E. to do the settings.
For I.E. 7, please set the Security level for this zone to Low.
4. The ActiveX control in your PC is not disabled. If you are not sure, please go to
Tools->Options->Security->Custom in your I.E. to enable ActiveX control.
5. Port 67 (control port) or port 68 (data port) is not blocked out by your router or ISP
(Internet Service Provider).
6. If the PC has used I.E. to access earlier software version of DVR, please go to
Tools->Options->General in your I.E. to
delete “Temporary Internet files” and all
offline contents
.
7. To have better look-&-feel for your PC, please go to Start->Setup->Control, and select
Display->Visual Style->Windows XP Style.
8. Please go to Start->Setup->Control, select Display->Settings, and set the Screen Resolution
to at least 1024x768 and Color to 32-bit.
Logon
After the above-mentioned items have been done correctly, restart your web browser and
enter the domain name or IP address of the digital video/audio recorder in the
Location/Address field of the web browser. The plug-in software in the system will be
downloaded and run automatically in the web browser. Please note that up to 5 users can
logon this DVR simultaneously.
Remote Display and Operations
After the plug-in software is downloaded and run in the web browser, you will be asked for
ActiveX control to interact with your PC. Please select Yes, and the remote login display will
be shown. For some PCs, it may be necessary to click in the window with the message in red
color, but outside the Login Dialog before the next step. Please enter the correct login name
and password (and control port & data port if they have been changed) for the digital
video/audio recorder to login the system. And the main remote display will be shown as
below.