Ptz control, Chapter 7 ptz, Control – LT Security LTD6299 User Manual
Page 55
- 54 -
The general operations are as below:
▲▼
Press these buttons to select the items.
ESC
Press this button to escape from this screen, and return to Network Setup display. If the
Save dialog is shown, press ENTER to exit and save, ESC to exit without saving.
Following is a brief description for each item and its specific operations:
Control Port – the control port for remote access. The default value is 67. Please
follow the Text Input method described in
to modify this item.
Data Port – the data port for remote access. The default value is 68. Please follow the
Text Input method described in
HTTP Port – the HTTP (web page) port for remote access. The default value is 80.
Please follow the Text Input method described in
to modify this item.
Note: If the Control Port or Data Port is not available or accessible during remote access,
the system will reset the ports to their default values, i.e. 67/68.
7. PTZ Control
The digital video/audio recorder supports a variety of PTZ cameras. The user can easily
control the PTZ cameras through the operations described in this Chapter if those PTZ
cameras have been connected and setup correctly. Please refer to
for the connections. Please refer to
PTZ ID of each PTZ camera, and
Section 6.9 RS-232/422/485 Setup
to setup the control port.
If a camera is also a PTZ camera, there will be an asterisk (*) preceding its title in its video
window in split-window display. Please press PTZ button to enter PTZ control mode if the
focus camera is a PTZ camera. The asterisk (*) will be changed to inverse color to indicate
that the camera is now in PTZ control mode.
In PTZ control mode, the user’s operations can be divided into general operations and
miscellaneous function specific operations, and are described as the followings:
General operations:
PTZ
Press this button to exit PTZ control mode. The asterisk (*) will be changed back to
normal color.
▲▼