LT Security LTD6299 - Manual (Page 56)

- 55 -
Press these buttons to tilt the camera up/down.
„
◄►
Press these buttons to pan the camera left/right.
„ ZOOM (
) +/-
Press these buttons to zoom in/out the camera.
„ GOTO
Press this button to move the camera to the preset position. Press numeric buttons
00-99 to enter the number of the preset position to move the camera to.
„ NEXT
Press this button for the next miscellaneous function. The miscellaneous functions
include Focus, Iris, Auto PAN, SEQ, Preset, and Pan Speed. And the active one will be
shown on the lower right corner of the screen. The miscellaneous function specific
operations are described in the following table.
Miscellaneous function specific operations:
Active function Operations Descriptions
Focus +/-
ENTER focus far/near
auto focus
Iris +/- Iris increase/decrease
Auto Pan (3)
+/-
ENTER
*
# Auto pan speed is shown in parenthesis
increase/decrease speed
start/stop Auto Pan
set start position
set end position
SEQ (5 sec.)
+/-, NUMBER
ENTER SEQ dwell time is shown in parenthesis.
If SEQ mode is on, the camera will
preset position 0-9 (or 1-10) sequentially.
change dwell time
start/stop SEQ mode, an asterisk (*) will
be shown if SEQ mode is on
Preset (1)
+/-, NUMBER
ENTER Preset location is shown in parenthesis
change Preset location
set Preset location
Pan Speed (3)
+/-
Manual pan speed is shown in parenthesis
increase/decrease speed