LT Security LTD6299 - Manual (Page 32)

- 31 -
„ Installed – whether this camera is installed or not. If installed, the following items will
be settable. Press ENTER to check/uncheck this item. The default setting is “ˇ” -
checked.
„ PTZ ID – the PTZ ID of this camera if it’s a PTZ camera. The PTZ ID has to be
consistent with the setting of this camera. Please refer to the manual of the camera for
the ID setting. Press +/- buttons to change the value (N/A or 0-255). The default
setting is “N/A” – Not Available, which means that it’s not a PTZ camera.
„ Group – the group which the camera belongs to if its record resolution is 360x240 or
360x288. It’s used to maximize the record capacity of the system. Please refer to the
table below for the maximum number of cameras in a group. None-selectable groups
will be disabled and grayed. Please press ▲▼◄► buttons to highlight the group, and
then press ENTER to select the group of the camera.
TV system Record
Resolution
Max. number of cameras
in a group
720x480 N/A
720x240 N/A NTSC
360x240 2
720x576 N/A
720x288 N/A PAL
360x288 2
Please note that the cameras in the same group will have the same record attributes such
as record quality, record IPS, etc.