LT Security LTD6299 - Manual (Page 52)

- 51 -
6.10 Network Setup
In Setup Menu display, press ▲▼ to change the highlighted option to Network, and then
press ENTER to call up Network Setup as shown.
The Network Setup allows the administrator to setup all Ethernet network related parameters.
Please check with your network administrator to set these parameters correctly.
The general operations are as below:
„ ▲▼◄►
Press these buttons to select the items.
„ ESC
Press this button to escape from this screen, and return to Setup Menu display. If the
Save dialog is shown, press ENTER to exit and save, ESC to exit without saving.
Following is a brief description for each item and its specific operations:
„ Net Type – Static IP, PPPoE, or DHCP. DHCP can only be used for intranet (LAN)
access, while Static IP and PPPoE can be used for both internet & intranet access. Press
+/- buttons to change the Net Type.
„ IP Address – Ethernet IP address for the system. To get the static IP address, please
contact your local ISP (Internet Service Provider). Please follow the Text Input method
described in
Section 4.1 to modify these items.
„ Net Mask – Net Mask for the IP address. Please follow the Text Input method described
in Section 4.1 to modify these items.
„ Gateway – Gateway IP address for the system. Please follow the Text Input method
described in Section 4.1 to modify these items.
„ DNS – DNS (Domain Name Server) IP address for the system. Please follow the Text
Input method described in Section 4.1 to modify these items.
„ Username – PPPoE username for the system if PPPoE is used. Please follow the Text