LT Security LTD6299 - Manual (Page 67)

- 66 -
Camera /
Status indicators for cameras 1-16 (GREEN for normal, RED for motion) for the DVR. Click
on any of these icons to select the corresponding camera of the DVR to be displayed in the
focus window.
Alarm In /
Status indicators for alarm inputs 1-4 (GREEN for normal, RED for alarm) for the DVR.
Alarm Out /
Alarm outputs 1-2 (GREEN for normal state, RED for triggered state) for the DVR. For
Administrator, click on any of these icons to control the corresponding alarm output from
normal to triggered, or from triggered back to normal.
Click on this icon to call up Search-by-time dialog. Please select the time (Year, Month, Date,
Hour, and Minute) and recorded video/audio type (Alarm, Motion, Video Loss, and Normal)
to search for playback. Click on Search button to start the search of the recorded video/audio.
(If it failed, the result will be shown on the title of the dialog.) Now, you may use the
playback buttons to play the recorded video/audio. Please note that there must be some
cameras in playback mode for the search to succeed.
Click on this icon to call up Search-by-event dialog. The event logs will be shown on the
screen. Please select the event type and source ID to search for the event logs. Click on
Refresh, Up, or Down to update the event logs. Click on the desired event log to highlight and
select it. Click on the OK button to search the recorded video/audio for the highlighted event
log. Now, you may use the playback buttons to play the recorded video/audio.
Click on this icon to call up search-PC-video dialog. Please select the file, and then click on
Open. Now, you may use the playback buttons to play the recorded video/audio in the file.
Click on this icon to show/hide full PTZ control panel. The user can click on the PTZ Panel
(but outside of any object in it) (to call up the Context menu) to move it.