Seed Hawk Raven 2011 - Manual (Page 23)

2
Manual No. 016-3001-003 13
Installation, Start Up & Registration
Start Up
Note:
Before connecting or using any additional or optional components with the Viper Pro precision
application management system, be sure to follow any installation instructions and verify proper
installation.
Before powering up the Viper Pro console, check that the console is properly mounted and all
power and cable connections have been installed properly as instructed in the previous sections.
Once installation of the Viper Pro precision application management system has been completed and verified,
the console may be powered up.
To start up the Viper Pro:
1. Press the power button on the Viper Pro console. The console will take approximately 2 minutes to power
up.
Note:
Pressing the power button when the following prompt is displayed on-screen will launch the touch
screen calibration wizard without displaying the Program Selection Menu.
This prompt is displayed for approximately five seconds and may be ignored to display the
Program Selection Menu as normal.