Resetting the tally registers, Setting or resetting distance and individual nodes – Seed Hawk Raven 2011 User Manual
Page 64
Chapter 3
54
Seed Hawk™ Viper Pro™ Installation & Operation Manual
Resetting the Tally Registers
Selecting the Reset button for any group of totals on the Tally Registers screen will reset the totals for each
node at the same time. For example, if you have three product nodes in the system and you
press the reset button above the field volume tally, the field volume for all three nodes will be reset to zero.
Pressing reset above the tank volume column will reset all product tank volumes to the tank volume set by the
operator.
Note:
Review the Data Box 1 for Products 1-3 section on page 32 or the following Setting or Resetting
Distance and Individual Nodes section for information on setting the tank volume.
Setting or Resetting Distance and Individual Nodes
To reset an individual node, or the odometer, press the Next button on the Tally Registers screen until the
screen for the desired node is displayed.This is helpful when applying product to different fields with different
nodes.
1.
From the Tally Registers screen, press Next. The Odometer screen displays.
2.
To set the Viper Pro Odometer:
a.
Using the on-screen keyboard, enter the desired values for Miles and Feet in the appropriate fields.
b.
Press Set.
3.
To reset the Odometer, press the Reset button. The Viper Pro odometer is reset to zero.
4.
Press Next. The Node 1 screen displays.
5.
To set tally data for any of the displayed totals:
a.
Touch the desired field to modify.
b.
Enter the desired value and press the Set button next to the entered value.
6.
To reset the data in the fields, press the Reset button to the right of the value to reset.
7.
Repeat step 5 or step 6 for each node.