Fire-Lite PRN-6 Reference-Manual - Manual (Page 15)

Calling up the menu You can access the menu in the following way:
Switch on the printer. Press the Setup key. The printer switches to Setup
mode. (The Setup mode can be selected both in the Online and Offline
mode).
To access the printer menu, press the Menu key.
Calling up a locked
menu
As mentioned earlier in the manual you are provided with the option of lock-
ing the menu, for example to prevent others from accessing it. You can do
this using the
MenLock parameter from within the menu itself.
(The MenLock parameter is described in detail in the menu description
table). You can access a locked menu by switching on the printer while
simultaneously pressing the Setup key.
Menu configurations
Every printer is shipped with factory default settings. Basic settings such as
emulation, character size, form length etc., which many applications make
use of, are set. At the end of this chapter you will find a menu printout
which shows you the printer’s default settings.
Your printer allows you to set and use four independent menu configura-
tions. If one of your applications for example requires an IBM printer while
another program works better with an EPSON printer, you can set an IBM
emulation configuration with the desired settings, and set the second con-
figuration as an EPSON emulation.
Online
Adjust Paperway
Menu Char
Setup
Programming via the control panel
1 - 8
BACK QUIT
?