Fire-Lite PRN-6 Reference-Manual - Manual (Page 16)

The active menu is always the one you used last. When you switch on the
printer for the very first time, menu no. 1 is loaded. Menu no. 1 only
remains active until you load another menu. Even after you turn off the
printer the menu that was active last remains the active menu and when
you switch the printer on again this menu is loaded automatically.
Example:
To change from menu no. 1 to menu no. 3:
Select Setup mode (press Setup key).
Select Menu mode (press key under Menu).
Select Menu again (press key under Menu).
Setup
Offline Trac.1
Park < > LF/FF
Online
Online
Adjust Paperway
Menu Char
Setup
Online
Print Menu
Back Next
Setup
1
4
Programming via the control panel
1 - 9
BACK QUIT
?