Fire-Lite PRN-6 Reference-Manual - Manual (Page 27)

Menu description table
1-20
Barcode On/Off * With this function selected it is possible to print different
barcodes and LCP (Large Character Printing). The defini-
tion and activation is performed by special sequences
through the interface. Since this selection is effective for
all emulations it must be noted that conflicts in sequence
conformity with the selected emulation may occur. For this
reason the barcode function must also be switched on
and off by MTPL sequences. (The possible barcodes,
LCP characters and their usage are described in the Bar-
code Programmer’s Application Manual and in chapter 2).
Barmode Secured
Unsecured *
In secured mode, the space which the barcode charac-
ters require is “protected”. In each line, other barcode or
normal characters can also be printed. These additional
characters are printed in the current line and in the subse-
quent lines, without affecting the barcode. Consequently,
normal characters can be printed in every line to the right
or left of the barcode.
In unsecured mode, the required paper transport for print-
ing barcodes and LCP is carried out automatically and it
is not possible to print more than one line of normal char-
acters in the barcode line. All characters in the mixed line
are printed such that their bottom edges are in a straight
line.
This function may be switched on and off by sequences.
For more information about Barmode see chapter 2.
Prn Ipct Normal *
High When PrnIpct = High is set with multi-part paper, the
impact force is increased if the paper thickness lever is in
position 2 to 8. The printing speed is thereby reduced.
Parameter group Parameter Description
BACK QUIT
?