Fire-Lite PRN-6 Reference-Manual - Manual (Page 43)

✔ <ESC>k<n> select font type LQ <n> = 0 ➵ Roman
1 ➵ Sans Serif
2 ➵ Courier
3 ➵ Prestige
4 ➵ Script
5 ➵ OCR-B
6 ➵ OCR-A
✔ ✔ ✔ ✔ ✔ <ESC>K<n1><n2> graphics 60 dpi
Formula: n = length of graphics data
<n2> = INT (n/256)
<n1> = n MOD 256
✔ ✔ <ESC>l<n> set left margin
narrow printer wide printer
<n> = 1 - 80 1 - 136 (10 cpi)
1 - 96 1 - 163 (12 cpi)
1 - 120 1 - 204 (15 cpi)
1 - 136 1 - 232 (17.1 cpi)
1 - 160 1 - 272 (20 cpi)
✔ ✔ ✔ ✔ ✔ <ESC>L<n1><n2> graphics 120 dpi
Formula: n = length of graphics data
<n2> = INT (n/256)
<n1> = n MOD 256
✔ ✔ <ESC>M set character density to 12 cpi (Elite)
✔ * * * * * <ESC>n locking shift 2 (LS2)
✔ ✔ ✔ ✔ <ESC>N<n> set space before perforation (perforation skip)
<n> = 1 - 127
✔ * * * * * <ESC>o locking shift 3 (LS3)
✔ ✔ ✔ ✔ <ESC>O reset perforation skip
✔ ✔ <ESC>p<1> proportional spacing ON
✔ ✔ <ESC>p<0> proportional spacing OFF
✔ ✔ <ESC>p1 proportional spacing ON
✔ ✔ <ESC>p0 proportional spacing OFF
✔ ✔ <ESC>P set character density to 10 cpi (Pica)
✔ ✔ <ESC>P<1> proportional spacing ON
✔ ✔ <ESC>P<0> proportional spacing OFF
✔ <ESC>q<n> select character representation
IBM IBM Epson Epson IBM-
MTPL Propr. Propr. FX850 LQ850+ AGM Code Function
XL XL24 FX1050 LQ1050+
List of available control codes
2 - 14
BACK QUIT
?