Badger Meter ORION Classic (CE) - Manual (Page 25)

Installation Manual
Remote Installation Bracket Kit
The Remote Installation Bracket Kit (64394-029) can be used to properly install an ORION endpoint in any indoor, outdoor
or pit application . Prior to beginning the installation procedure, ensure that the following items are available .
• Remote Installation Bracket kit
• Two customer-supplied screws
• Screwdriver and drill
The remote installation bracket securely mounts an ORION endpoint . For non-submerged indoor and outdoor applications,
the installation bracket can also be used to enclose gel-cap, wire-splice connections, to protect them from the environment
and to prevent tampering in any indoor or outdoor non-metallic joist, wall or pit application .
Figure 19: Remote installation bracket
To install the bracket to the endpoint housing, follow these steps .
1 . Place the encoder cable harness through the slit in the bracket with the screw holes at the bottom .
NOTE: N Carefully slide the cable harness through the slit in the bracket .
Figure 20: Cable harness threading
Slit
Screw holes
0 .18" diameter
Page 25 June 2014