Overview, Product unpacking and inspection, License requirements – Badger Meter ORION Classic (CE) User Manual

Page 5: Mportant i

Advertising
background image

Installation Manual

OVERVIEW

This manual contains installation instructions for ORION® water endpoints .

Installation of ORION endpoints must comply with all applicable federal, state and local rules, regulations and codes .

Failure to read and follow these instructions can lead to misapplication or misuse of this product, resulting in

personal injury and damage to equipment .

Proper performance and reliability of ORION endpoints depend upon installation in accordance with

these instructions .

PRODUCT UNPACKING AND INSPECTION

Upon receipt of the product, perform the following unpacking and inspection procedures .

NOTE:

N

If damage to the shipping container is evident upon receipt, request the carrier to be present when the product

is unpacked .

Carefully open the shipping package, follow any instructions that may be marked on the exterior . Remove all cushioning

material surrounding the product and carefully lift the product from the package .
Retain the package and all packing material for possible use in reshipment or storage .
Visually inspect the product and applicable accessories for any physical damage such as scratches, loose or broken parts or

any other sign of damage that may have occurred during shipment .

NOTE:

N

If damage is found, request an inspection by the carrier’s agent within 48 hours of delivery and file a claim with the

carrier . A claim for equipment damage in transit is the sole responsibility of the purchaser .

Carefully remove the pre-wired ORION endpoint and encoder assembly or ORION endpoint from the shipping carton and

inspect for damage . Retain the contents of the installation kit for use in mounting the endpoint in the field .

LICENSE REQUIREMENTS

ORION Fixed Network, Migratable and Classic endpoints comply with Part 15 of FCC Rules . ORION Cellular endpoints comply

with Part 15, Part 22 and Part 24 of FCC Rules .

Operation is subject to the following conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation of the device .
In accordance with FCC Regulations, “Code of Federal Regulations” Title 47, Part 2, Subpart J, Section 1091, transmitters

pass the requirements pertaining to radiation exposure . However, to avoid public exposure in excess of limits for general

population (uncontrolled exposure), a

20 centimeter

distance between the transmitter and the body of the user must be

maintained during testing .
No FCC license is required by a utility to operate an ORION meter reading system .
This device complies with Industry Canada license-exempt RSS standard(s) . Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of the device . Le présent appareil est conforme aux CNR d'Industrie Canada applicables

aux appareils radio exempts de licence . L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas

produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d'en compromettre le fonctionnement .

MPORTANT

I

Transportation: The Federal Aviation Administration prohibits operating endpoints and receivers on all commercial

aircraft. The ORION endpoint is considered an operating transmitter and cannot be shipped by air.

Page 5

June 2014

Advertising
This manual is related to the following products: