Badger Meter ORION Classic (CE) - Manual (Page 8)

ORION® Water Endpoints
308/Nicor In-line Connectors
An in-line connector is an optional feature that allows connectivity to AMR/AMI devices without the need for a field splice
kit . When the endpoint and encoder have Badger Meter connectors, connect the male and female connector ends . The
connectors go together easily with the proper orientation .
• With 308 connectors, align the notch on the female end with the corresponding projection on the male end (See 308
Connector, Figure 2 ) and push the ends together for the correct fit .
• With Nicor connectors, align the arrows on the connectors (See Nicor Connector, Figure 2 ) and push the male and
female ends together .
You will hear a “click“ when the ends are firmly seated and the connection is secure .
Female end Male end
308 Connector Nicor Connector
Figure 2: In-line connectors
Notch Projection
Arrows
Male end Female end
Page 8 June 2014