Test profi les – Crystal FastCalXP Calibration Software User Manual
Page 18
Calibrating Gauges
16
FastCalXP Operation Manual
TEST PROFILES
Test profi les are the standardized series of pressure levels used for the calibration of each model. Thus, there is a profi le for As Received calibrations and a
profi le for As Left calibrations associated with each model in the database.
To Select a Test Profi le
Test profi les can be specifi ed within the New Model Wizard (accessed via the New Gauge Wizard).
1
Use the
AR test profi le and AL test profi le pull-down lists
to select a test profi le for the As Received calibration and a test profi le for the As Left calibration.
2
If the desired profi le is not listed, click the
Create New Profi le button
to open the Profi les editor.
Refer to the discussion of
in the
for help with the Profi les editor.
To Edit a Profi le or Add a New Profi le Outside of the New Model Wizard
Choose
Manage Database
from the Tools menu and click on the
Profi les button
to open the Profi les editor.
To change the profi les that are associated with a model
1
Choose
Manage Database
from the Tools menu and click on the
Models button
to open the Models editor.
2
Select the desired model and choose the desired profi les from the pull-down lists for
AR test profi le
and
AL test profi le
.
3
If a desired profi le is not listed, click the
Create New Profi le button
to open the Profi les editor.
When the profi le has been created, return to the Models editor and select the profi le from the pull-down list.