Crystal FastCalXP Calibration Software - Manual (Page 29)

Settings and Options  27
FastCalXP Operation Manual
 XP2/Model 30 Serial Port
The XP2/Model 30 serial port specifi es which port FastCalXP will look at to fi nd the Crystal reference. Typically, this is set to ‘Auto’, and FastCalXP will automati-
cally detect the serial port to which the gauge is connected. Change to the specifi c serial port if your confi guration requires it.
 HART Modem Serial Port
The HART modem serial port specifi es which port FastCalXP uses to connect to the HART Modem while calibrating transmitters. Choose the serial port to which
your HART Modem is connected.
 Language
The Language selection will list all available languages for FastCalXP that have been installed. Language packs are available through your local distributor as
well as online at http://www.crystalengineering.net. After changing the language, you will need to restart FastCalXP before the change will take aff ect.
 Use Custom Audio Alert
The Use custom audio alert checkbox allows you to change the sound that is played when FastCalXP automatically advances to the next pressure point during
calibration.
Certifi cate Settings
Certifi cate Settings defi ne the ways certifi cates are generated and saved.
 Default Certifi cate Template
The Default certifi cate template is the calibration certifi cate template that will be used, by default, for creating certifi cates. This can be overridden by check-
ing Use custom certifi cate template in the model confi guration. Refer to the Creating Certifi cates section for a discussion on creating and editing certifi cate
templates. Refer to Models in the Managing the Database section for information on selecting alternate templates.
 Default Excel Version
Specify an Excel Version that will be used as a default for all newly created certifi cates. The default setting is .xls fi les in Excel 97-2003 format.