Quick start, Set up the calibration, Y the – Crystal FastCalXP Calibration Software User Manual
Page 7: Quick, Start
Quick Start
5
FastCalXP Operation Manual
Quick Start
This section provides a summary of the four basic steps needed to complete a calibration using FastCalXP. It is intended to get you quickly up and running
upon installation and to provide a guide for the new user of an existing installation.
The four basic FastCalXP steps are displayed in the center of the main window and following the steps from left to right will get you through a calibration ses-
sion. At the completion of any step it is possible to return to any previous step using the back arrows.
Before attempting calibrations, verify that your work station is set up as described above.
SET UP THE CALIBRATION
1
Run FastCalXP. After the initial installation, FastCalXP does not require a username or password. However, if the Login option has been engaged, FastCalXP
will prompt you for your username and password.