PATLITE FV-127JP - Manual (Page 24)

- 24 -
(E) Hold Playback
While the input is held on, the voice message playback is possible.
When the input is released, the voice message playback stops.
In this mode, the STB does not operate for the Binary Input Mode. Shorting the CH terminal wire to the COM terminal
will play back the message.
The playback will play repeatedly as long as the input is held on.
In this mode, the One-shot input will not operate.
The message playback can be stopped by shorting the CLR or STOP terminals.
【 Pulse Train for Binary Input】
【 Pulse Train for Bit Input】
⑳ ・ ・ ・ Displays playback of voice message No.20
・ ・ ・ Displays the voice message being played back was stopped.
For the Binary Input mode, hold the CH terminal for 10ms or less ( ※ ).
If the input is not held within 10ms, another message will start playback ( ※ ).
The input delay time is set for 10ms. The input delay can be set for 50ms, for a 50ms delay.
1 Channel Input
2 STB
3 STOP (CLR)
4 Voice Message
5 Busy
No.
20
No. 20 No. 20
No. 20 No. 20 No. 12 No. 12 No. 12
No. 12
No.
8
No. 8 No. 8
No. 8
No. 1
1 CH1
2 CH2
3 CH3
4 STOP CLR)
5 Voice Message
6 Busy
No. 1 No. 2 No. 1 No. 1 No. 1 No. 1 No. 3