Error table – PATLITE FV-127JP User Manual

Page 31

Advertising
background image

- 31 -

9. Error Table

When the status indicator LED (red) fl ashes, an error has occurred. Refer to the following table for troubleshooting
and its solution.
The Status Indicator LED fl ashes in accordance to the error, from one (1) to four (4) fl ashes.

If the items above do not solve the problem, refer to the last page for assistance from your PATLITE Sales
Representative.

When the slide switch is in the position
indicated in the drawing to the right, it is in
the protect condition. Move the swith in the
direction of the arrows to change from “Protect”
to “Release”

Red LED

Status Indicator

Flashes

Error Name

Solution

Flashes 1Time

Playback Error

Voice Message data writing not completed. Rewrite the voice message data
again.

• Possible

MP3

fi le corrupted. Check whether the previous data can be played

back on the personal computer.

Flashes 2 Times SD Card Error

The SD card is not fully inserted or missing. Reinsert the SD card.

The SD card has been formated for something other than FAT16. Reformat the
SD card for FAT16 and reload the message data.

The write protection tab on the SD card is activated. Select the tab for “release”
to allow writing. (Refer to the drawing below)

Flashes 3 Times Data Error

Use the “Help” in the PATLITE playlist editor (included in the package) to verify
the playback data is uncorrupted.

Flashes 4 Times Internal Memory Error •

Memory data has exceeded the allowable amount. Check the rewriten data.

Protect

Release

Advertising