PATLITE FV-127JP - Manual (Page 5)

- 5 -
3. Part Names and Function
1. Installation Holes 4-φ3.5
Use the installation holes when mounting. ( ☞ Refer to pg. 9 [4. Installation])
2. Power Indicator LED (Green)
The LED light turns on when power is applied.
3. Status Condition Indicator LED (Red)
See the table below for the fl ashing or non-fl ashing indication depending on the function:
4. Glass Fuse
Fuse to protect from overcurrent or overvoltage. Refer to the specifi cations below when
replacing:
Glass Fuse: φ5.2×20 Rated Current: 1.0A Standard Fusion Type
Replacement Part: Nippon Seisen Co., Ltd. FBM 250V 1A / Fujitsu Electric FGMB 250V
Before replacing the fuse, disconnect the power source. The possibility of circuitry shorting or
electrocution may occur.
LED Status Operation
Off During standby or audio message playback.
On
When transferring voice message
When exporting voice message
Flashing
Error during playback
( ☞ Refer to pg. 38 [9. Error Table])
%CWVKQP
1) Installation
Holes 4-φ3.5
2) Power Indicator
LED (Green)
3) Status Indicator
LED (Red)
4) Glass
Fuse
5) Volume Volume
(AUX) Speaker)
6) Terminal
Block
7) DIPSwitches
8) Installation
Holes
9) FG
Hole
10) Noise Filter
Pin B
Noise Filter
Pin A