PATLITE WDR-LE - Manual (Page 34)

32
Wireless Data Aquisition System Comprehensive User's Manual
Installation and Use
7. How to Operate
7.1 Important Notice
:DUQLQJ
Prohibited
Do not use the product where condensation may form.
Failure to do so may result in fi re or electric shock.
Do not use this product in the vicinity of pacemakers or electric medical equipment.
Radio waves may aff ect these devices and malfunction may occur.
Turn the product off while in airplanes, hospitals, or other places where radio waves may
aff ect surrounding equipment or where wireless devices are prohibited.
Failure to do so may result from equipment malfunction to FCC infringement.
Enforced
If smoke, odor, or other abnormalities are present, immediately stop supplying power to
this product.
Using the product under such conditions may result in fi re or electric shock.
Please
● Prior to product installation, ensure the power has been disconnected.
● Do not allow the computer to enter modes such as sleep mode, suspend or stand-by. Allowing to do so will disable
data communications between the computer and receiver.
● Due to various environments (noise, temperature, etc.), it is recommended to fully test the product in the desired
location before putting into application.
Note
● Due to the nature of radio waves, even with adequate access range, noise or the casing, etc., may cause poor
reception.
7.2 Receiver to Host （Computer, etc.) Connection
■ Check before Operating
● The power supply to the reciever is properly connected.
● Driver installation is necessary when connecting to a computer. For connecting to anything other than a computer,
perform the setup in conjunction to the customer's environment.