PATLITE WDR-LE - Manual (Page 42)

40
Wireless Data Aquisition System Comprehensive User's Manual
■ Caution for LAN Use
● Verify the IP Address to the computer prior to connection.
※ The default IP Address value for the receiver is set as "192.168.0.1", the sub address is "255.255.255.0".
● In case the IP Address to the receiver changes while connecting to the Intranet LAN, Use the "Device Installer" to
change the settings.
● When making a direct connection to the computer LAN port, use a cross LAN cable.
Note
● Refer to the LANTRONIX® Inc. Homepage for use of the "Device Installer".
7.3 COM Port Allocation Confi rmation (For USB）
1
Verify the Power LED (Green) is fl ashing.
Note
● If the green LED does not fl ash, then double check
the connections.
2
Open the [Device Manager].
Note
● Due to varying computers, refer to the computer's "Help and Support" on how to open the device manager.
3
Inside the [Port （COM and LPT）], verify the [Communication Port (COM ＊＊ )] is displayed.
Note
● The COM Port No. ( ＊＊ ) is automatically allocated.
● Verify the allocated COM Port No. ( ＊＊ ). The COM Port No. is necessary when setting the COM Port.
Flash