For lan connection – PATLITE WDR-LE User Manual
Page 90
88
Wireless Data Aquisition System Comprehensive User's Manual
■
For LAN Connection
Please
●
Verify there is no power to the transmitter before connecting the LAN.
●
Do not change the fi le confi guration while in use. During start-up, changes will not be refl ected.
●
After the confi guration fi le is changed, restart the application.
Note
●
The IP Address for this unit is "192.168.0.1". If the IP Address is changed, perform the changes in the
"DeviceInstaller".
1
Double Click the "WDS-AE" icon.
➡ The [Select File] dialog box opens. (First time only)
Note
●
From the second time on, the confi gured fi le
[WDS-AE【LAN】] will automatically open.
2
Select the confi gured fi le ("extension".init),
then click the [Open] button.
➡ The [WDS-AE【LAN】] will open.
3
Click the [IP Setting] button.
➡ The [IP Setting/Connect] dialog box opens.
4
Click the [Connect] button.
➡ The [Connect] button turns a dark green.
Note
●
The confi guration for the connection button to the
number of linked hosts becomes active.
●
When two (2) or more receivers are connected,
absolutely do not make duplicate IP Addresses.
Double Click
(1) Select
(2) Click
Click
Click