PATLITE WDR-LE - Manual (Page 54)

52
Wireless Data Aquisition System Comprehensive User's Manual
(6) Wireless Set Parameter Acquisition Request Recieived
The following is the received response from a "Wireless Set Parameter Acquisition Request" command.
SOP Cmd
Len Status Wireless Setting ID
Wireless Setting
ID Data
FCS
0x02 0x10 0x13
1 byte 2 bytes 1 byte 1 byte 2 bytes Undefi ned 1 byte
① ② ③
① Status ： 0x00 ：Pass
Any value outside the indication above is a "Fail" status.
② Wireless Setting ID ： 0x0210 ：Pan ID
0x0211 ：Frequency Channel
0x0230 ：Module Setting, Output Strength
0x0247 ：Group ID
③ Wireless Setting ID Data ： Set Data for the Individual Wiring Setting ID.
(7) Data Transmission Completion Notice
The following is the notifi cation response from when data transmission (Cmd=0x000A) is completed.
SOP Cmd Len
Status
Packet
Number
FCS
0x02 0x20 0x0A 0x02
1 byte 2 bytes 1 byte 1 byte 1 byte 1 byte
① ②
① Status ： 0x00 ：Pass
0x82 ：Improper Parameter
0x83 ：Non-participating Network
Any value outside the indication above is a "Fail" status.
② Packet Number ： Will be equivalent to the data transmission setting.