PATLITE WDR-LE - Manual (Page 52)

50
Wireless Data Aquisition System Comprehensive User's Manual
■ Transmission Command between Receiver and Host
Packet classifi cation needed for Host to Receiver data transmission.
＜ Packet Classifi cation List ＞
№ Packet Classifi cation Command Value Command Direction
(1) Reset Request 0x0005 Host → Receiver
(2) Wake-up Notice 0x2005 Receiver → Host
(3) Wireless Set Parameter Change Request 0x0012 Host → Receiver
(4) Wireless Set Parameter Change Received 0x1012 Receiver → Host
(5) Wireless Set Parameter Acquisition Request 0x0013 Host → Receiver
(6) Wireless Set Parameter Acquisition Request Recieived 0x1013 Receiver → Host
(7) Data Transmission Completion Notice 0x200A Receiver → Host
(8) Network Start Notice 0x2D00 Receiver → Host
(9) Participating Transmission Notice 0x2D10 Receiver → Host
(10) Non-participating Transmission Notice 0x2D11 Receiver → Host
(11) Status Confi rmation Notice 0x2D13 Receiver → Host
(1) Reset Request
Reset Request is used in order to reset the wireless module of the receiver. The response can be
checked in the wake-up notifi cation （Cmd=0x2005).
SOP Cmd Len Set Value
FCS
0x02 0x00 0x05 0x01 0x00
1 byte 2 bytes 1 byte 1 byte 1 byte
(2) Wake-up Notice
Notice is sent after Power Applied/Reset conditions.
SOP Cmd Len
Status FCS
0x02 0x20 0x05 0x01
1 byte 2 bytes 1 byte 1 byte 1 byte
①
① Status ： 0x82 ：Power Applied
0x10 ：Reset performed by reset request