PATLITE WDR-LE User Manual
Page 73
71
Wireless Data Aquisition System Comprehensive User's Manual
4
Click the [Run] button.
➡ The display changes to [Stop].
5
Apply power to Transmitters.
➡ If connected properly, the gradition on the indicator
lamp to the transmitter should turn either green or
orange).
Note
●
Depending on the signal strength, the gradition colors
may diff er.
Green
:Very Good
Orange
:Good
Red
:Poor
●
Any other color outside green or orange indicates an
error.
Refer to the attached "Troubleshooting Guide" to
correct the error.
➡ In the [Connected Transmitter] box, the MAC
Address should appear.
Please
●
After clicking the [Run] button, turn on power to
transmitters. If the order in which the transmitters
are plugged in before the [Run] button is clicked,
the MAC Address will not be displayed for the
transmitters.
Click
MAC Address