6 initial startup – Sterlco SGBD Series Batch Gravimetric Blenders User Manual
Page 53
Advertising
BLN1-600A
Chapter 3: Installation
53 of 116
3-6 Initial Startup
The operator can start the blender by touching
on the Recipe Page.
The switch will show
when running. If the operator selects “Stop Blender” then the
current batch in progress is first finished and then the blender will stop making new batches.
To immediately stop the blender, the operator can touch
on the Recipe Page. This will
cause the blender to stop making the current batch immediately. If the blender is stopped in
this method then the current batch will not be completed properly.
Advertising