Sterlco SGBD Series Batch Gravimetric Blenders - Manual (Page 67)

BLN1-600A Chapter 4: Operation 67 of 116
Every Batch:
This mode of operation weighs every component of every batch that is metered by the
Batch blending system.
Every Other Batch:
First batch weighed. Second batch is metered based on the metering times of the first
batch.
Every Third Batch:
First batch weighed. Second and third batches are metered based on the metering times
of the first batch.
Every Fourth Batch:
First batch weighed. Second, third, and fourth batches are metered based on the metering
times of the first batch.
Every Fifth Batch:
First batch weighed. Second, third, fourth, and fifth batches are metered based on the
metering times of the first batch.
Never Weigh:
Metering is based on Feed Calibration values only. Loadcells are not used. This is only
used if you have a failed loadcell.
• Not weighing every batch sacrifices blender weighing accuracy, but
increases the blender’s maximum rate.