Sterlco SGBD Series Batch Gravimetric Blenders - Manual (Page 97)

BLN1-600A Chapter 7: Appendix 97 of 116
PORTANT INFORMATION CONCERNING MAX. BLENDING RATE LISTED:
• The standard maximum blending rate is based on a 3-component blend running 80% virgin, 18% regrind (free-flowing)
and 2% pelletized color. Each additional component reduces the overall maximum rate by 20% per component.
• Recipes with more than 50% regrind will significantly reduce the throughput, and minor ingredient accuracy, of the
blender. Consult the factory for achievable rates.
• Two component recipes may REDUCE overall blender throughput due to reduced available weigh hopper capacity.
Consult the factory for achievable rates.
• Rates are based on dry, free-flowing virgin pellets with a bulk density of 35 lbs./ft 3 . Rates will vary as a result of the
number of blender components, the materials, and the recipe(s) used. Consult the factory for guaranteed rates.
• Material samples are required for testing prior to shipment for guaranteed rates. Consult the AEC Sales Department for
shipping instructions and for the amounts of each material to send for testing. A test request form must be submitted,
Component Watt Rating
120/24 VDC
Supply
AB/Mitsubishi
PLC
IEC Contactors Relays Solenoids Lamps
.6A 24W
Allen Bradley
88
CO9-30
8/70VA
C37
9/80VA 4PDT
1.2VA
¼"
16/30VA
Full Volt 3W
C43
10/130VA
C60-85
16/200VA
2.1A 50W
Mitsubishi
50W
D110
37/370VA
D180
37/370VA
2DPT
1.2VA
½"
16/30VA
Transformer
1.5W
D250, D300
37/370VA
D400 37/370VA
D600
37/370VA
Machine Tool
19/138VA
¾",
1"
6.1W
IDI INCAND
.5W
Mixer Motor Amp Rating
Part Number HP FLA @ 230VAC FLA @ 115VAC
Starting Current
@ 230VAC
Starting Current
@ 115VAC
720.00001.00 1/6 1.0 AMP 2.1 AMP 2.5 AMP 5 AMP
720.00002.00 1/3 3.3 AMP 6.6 AMP 18 AMP 36 AMP
720.00030.00 1/2 N/A 7.8 AMP 24 AMP 48 AMP
51354 1 7.0 AMP 14.0 AMP 21 AMP 41 AMP