Brother MFC-640CW - Manual (Page 28)

1 - 3 INTRODUCTION
7 Fax Resolution
Adjusts the resolution when you
send a fax.
8
Black Start
Lets you start sending faxes or
making copies in black & white.
Also lets you start a scanning
operation (in color or black,
depending on the scanning setting
in the ControlCenter2 software).
9
Color Start
Lets you start sending faxes or
making copies in full color.
Also lets you start a scanning
operation (in color or mono,
depending on the scanning setting
in the ControlCenter2 software).
0
Stop/Exit
Stops an operation or exits from the
menu.
A On/Off
You can turn the machine on or off.
B Menu keys:
Menu/Set
The same key is used for Menu and
Set operations.
Lets you access the Menu to program
and store your settings in the machine.
Volume keys
In fax mode, you can press these
keys to adjust the volume.
▲ Search/Speed Dial
Lets you look up numbers that are
stored in the dialing memory. It also
lets you dial stored numbers by
pressing # and a two-digit number.
Press to scroll backward to a menu
selection.
▲ or ▼
Press to scroll through the menus
and options.
C LCD (liquid crystal display)
Displays messages on the screen to
help you set up and use your machine.
When the machine is connected to a
wireless network a four level
indicator on the right of your
machine’s LCD shows the wireless
signal strength.
o Max
▲
▲
▲