Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 143)

The print procedure is as follows.
1.
In the application, create an original in the format of a horizontal or vertical banner.
2.
In Page Setup, register Custom Page Sizes (Mac OS X 10.3.9–10.5) / Custom Paper Sizes (Mac OS X 10.6).
Once you register Custom Page Sizes / Custom Paper Sizes, you then can select it repeatedly from the paper size list.
Custom Page Sizes / Custom Paper Sizes can be set up to 18.0 m.
3.
Print the banner, using the settings that correspond to banners.
Note
• The following procedures are based on Mac OS X 10.5. The method of setting up non-standard paper sizes
varies depending on the version of Mac OS X.
Register a Custom Page Sizes
This example describes how to register and print using a page size that is horizontally elongated and suitable for banners in
either horizontal or vertical format.
1.
Create the document in the application.
2.
Choose Print in the application menu.
3.
Select the printer in the A Printer list.
Enhanced Printing Options > Printing banners or at other non-standard sizes >
iPF750 Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X)
2
127