Canon imagePROGRAF iPF750 MFP M40 - Manual (Page 696)

Setting Item Description, Instructions
GL2
Set-
tings Line &
Pen
Man-
ager Smoothing • If you choose Software
Operation is determined by the application. If noth-
ing is specified by the application, the result is as
shown in the figure.
Note: By default, this is a 72-sided figure
• If you choose Smooth
ThickenFineLines Select On to print fine lines more distinctly.
AdjustFaintLines If fine lines are printed in colors that do not match the
colors of other shapes, selecting Off may help produce
the expected results. However, lines in some colors
may appear broken.
Proces-
singOp-
tion Warning Select On to have any GL2-related warnings dis-
played.
PageSizeProcess1 Normally, the area available for printing excludes a
margin required by the printer, and images are posi-
tioned accordingly. Selecting On in this setting elimi-
nates any misalignment of the printing position if the
image itself includes a border.
PageSizeProcess2 Selecting On will determine the paper size based on
the image rendering area.
GL2 Set Print Print GL2 settings information.
Inter-
face
Setup EOP Timer Specify the timeout period before cancellation of print
jobs that cannot be received by the printer.
TCP/I
P IPv4 IPv4 Mode Choose whether the printer IP address is configured
automatically or a static IP address is entered manual-
ly.
Proto-
col DHCP Specify the protocol used to configure the IP address
automatically.
BOOTP
RARP
Control Panel > Printer Menu >
Menu Settings iPF750
8
680